Would you like to include this product in your range? Then contact us.
Content: 0,5 litres
EAN: 7435139219284 25
Surface sprayed
Product rubbed in
Let the product soak in
Splattered oil
Clean up
End-result
Spray PE Protect evenly several times from a distance of 20 cm. Then spread the product evenly with the wiper or microfibre cleaning pad.
The floor or wall must still be damp for at least 10 minutes after application. If the wall or floor becomes dry within this time, apply the product again immediately. Do not allow the surface to dry completely, otherwise the next layer will not penetrate sufficiently.
Remove surplus agent with the squeegee or wipe it towards areas that absorb faster or appear to be drier.
After 10 minutes, wipe the treated surface thoroughly with a microfibre pad or tissue and dry streak-free.
After 45-60 minutes, repeat steps 1 to 4 two to three times.
Leave to dry for at least 24 hours before use. Longer drying gives better effect.
If the substrate is cleaned with a cleaning agent, re-apply PE Protect.
PE Protect is a ready-to-use hydroleophobic surface treatment agent based on fluoropolymers and high-quality additives for surfaces, such as floors and walls, that need to be protected against contamination by oil, grease and such. After treatment, the product is invisible, highly oleophobic, even water-repellent and extremely durable. Thanks to innovative technology, the agent reacts extremely quickly. In most cases, the surface is oil-peeling immediately after the surface has dried. Once treated with PE Protect, floors and walls stay cleaner and cleaning is easier.